Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.

Past Event Schedule

Wednesday, July 29th, 2020 - 10:00 AM (Pacific Time)
ASSEMBLY AND INSPECTION
AN EVOLUTION IN STEREOMICROSCOPE DESIGN
In this webinar you will discover how modern changes in traditional stereomicroscope design have resulted in an optical tool better suited for assembly, rework and inspection. A presentation of optical design approach and practical results will illustrate the advantages of creative use of basic opt...
Tuesday, July 28th, 2020 - 10:00 AM (Pacific Time)
PLANAR TRANSFORMERS AND INDUCTORS FOR EMBEDDED APPLICATIONS
Energy conservation for reasons of cost, battery life, heat, and environmental issues push designs to lower voltage and smaller size --- a key parameter for industrial design as well. Planar technologies provide the increased power density and efficiency required to meet these needs.
Wednesday, July 22nd, 2020 - 10:00 AM (Pacific Time)
AUTOMATED CABLE TESTING BEST PRACTICES
The focus of this presentation is on the use of automated cable and harness testing best practices. No prior knowledge of cable testing is needed as we will review the basics of Ohms Law, testing errors (opens, shorts, miswires, etc.) and why automated cable testers are used. We will discuss th...
Tuesday July 21st, 2020 - 10:00 AM (Pacific Time)
RECRUITING TOP TECHNICAL TALENT

Top Talent Search Experts

- Attracting highly-skilled Technical, Managerial, and Sales talent is no easy task. We'll discuss some of the key steps that help to make the recruitment process successful.

- Helping our clients in the Test and Measurement, Power Electronics, Aer...
Friday, July 17th, 2020 - 11:00 AM (Pacific Time)
HIPOT ELECTRICAL SAFETY TRAINING
Program Overview: - Voltage & Current Safety Overview - What Not to do! - Are Hipot Testers Safe? - Setting up a Safe Work Area - High Voltage Safety Standards - Training for Safety Overview: Your boss has just given you a hipot electrical safety tester. You've never used one before and yo...
Wednesday, July 15th, 2020 - 10:00 AM (Pacific Time)
MICROPEM FASTENERS ARE THE BETTER ALTERNATIVE TO SCREWS
Learn how you can reduce the size and weight, and cost, of your designs with microPEM fasteners.
Tuesday, July 14th, 2020 - 10:00 AM (Pacific Time)
VIKING TECH PASSIVE COMPONENTS
The resistor, inductor, and capacitor offerings of Viking Tech, an advanced technology passive component manufacturer.
Thursday, July 9th, 2020 - 10:00 AM (Pacific Time)
BENEFITS OF AUTORANGING DC POWER SUPPLIES IN TEST APPLICATIONS
The Benefits associated with Autoranging DC Power Supplies in Test Applications.
Wednesday, July 8th, 2020 - 10:00 AM (Pacific Time)
HOW TO UTILIZE TRANSPARENT PROTOTYPES
INAC US is an expert in product development. We transform the ideas and imaginations of our customers into products with our innovative technology and over 20 years of experience. In addition to machining, modeling, and welding, we offer design and painting services.
Wednesday, June 24th, 2020 - 10:00 AM (Pacific Time)
A SIMPLE EMI/RFI FILTER SOLUTION: EESEAL® SILICONE RUBBER INSERTS FOR CONNECTORS
Learn about a simple solution that solves EMI/RFI filtertration, transient issues and more inside of your standard connector in a matter of seconds. Fast, Effective and Easy! Custom samples in 24-48 hours!
Tuesday, June 23rd, 2020 - 10:00 AM (Pacific Time)
HIGH RELIABILITY SIGNAL AND POWER CONNECTORS
Overview of Positronic high reliability connectors (Including our industry leading configurable interconnects).
Thursday, June 18th, 2020 - 10:00 AM (Pacific Time)
WHY DO AC SOURCES HAVE VOLTAGE DISTORTION, WHAT CAUSES IT AND WHY DOES IT MATTER?
Voltage distortion is an important performance specification for a programmable AC power source used for design,developement and production test. This webinar explores causes, impact and difference in distortion performance of different AC power source designs.
Wednesday, June 17th, 2020 - 10:00 AM (Pacific Time)
SETTING UP A MANUFACTURING OPERATION IN MEXICO, TURNKEY SOLUTIONS AND COSTS
Veronica Contreras, is a seasoned global business consultant with over eighteen years of experience working with C-level executives for US Companies in the evaluation process of setting up of their operations in Mexico. She is an expert in facilitating the startup process for manufacturers in a maqu...
Tuesday, June 16th, 2020 - 10:00 AM (Pacific Time)
HOW TO HAVE A SECURE SUPPLY CHAIN.
Michele will discuss the critical factors in selecting vendors that will avoid disruptions and ensure a secure supply chain
Thursday, June 11th, 2020 - 10:00 AM (Pacific Time)
MATERIAL SELECTION FOR MEDICAL PRODUCT PRODUCTION IN A POST-PANDEMIC WORLD
With the COVID-19 pandemic, there’s been renewed interest in Antimicrobial Masterbatches and ESCR (environmental stress cracking resistant) Materials for immediate part design and production of Medical components. The challenge of selecting a material for product production does not end once th...
Wednesday, June 10th, 2020 - 10:00 AM (Pacific Time)
TIMING PRODUCTS FOR THE IOT WORLD
Learn what role frequency products play into the hardware required for the developing markets of IOT world. Crystals and Oscillators, advanced timing components and what new packages are required for IOT wearables.
Tuesday, June 9th, 2020 - 10:00 AM (Pacific Time)
PCBA RISK MITIGATION THROUGH SOLDER PASTE AND FLUX BEST PRACTICES
This presentation focuses on solder paste flux, liquid flux and wire solder fluxes and how their usage and the ingredients can affect PCBAs. If no clean fluxes are partially cleaned then the flux ingredients can pose a risk similar to un-washed high activity water soluble fluxes. Rework of solder ...
Monday, June 8th, 2020 - 10:00 AM (Pacific Time)
NI-LESS ENIG-PREMIUM: SURFACE FINISH FOR NEXT GENERATION PCB TECHNOLOGIES - 5G, HDI, RF-MICROWAVE, HIGH FREQUENCIES
The advent and ongoing evolution of internet-enabled mobile devices has continued to drive innovations in the manufacturing and design of technology capable of high-frequency/high-density electronic signal transfer. The combined requirements for both fast, always-on data transmission, and small geom...
Tuesday, July 14th, 2020 - 10:00 AM (Pacific Time)
VIKING TECH PASSIVE COMPONENTS
The resistor, inductor, and capacitor offerings of Viking Tech, an advanced technology passive component manufacturer.
Wednesday, July 8th, 2020 - 10:00 AM (Pacific Time)
HOW TO UTILIZE TRANSPARENT PROTOTYPES
INAC US is an expert in product development. We transform the ideas and imaginations of our customers into products with our innovative technology and over 20 years of experience. In addition to machining, modeling, and welding, we offer design and painting services.
Wednesday, June 17th, 2020 - 10:00 AM (Pacific Time)
SETTING UP A MANUFACTURING OPERATION IN MEXICO, TURNKEY SOLUTIONS AND COSTS
Veronica Contreras, is a seasoned global business consultant with over eighteen years of experience working with C-level executives for US Companies in the evaluation process of setting up of their operations in Mexico. She is an expert in facilitating the startup process for manufacturers in a maqu...
Tuesday, June 16th, 2020 - 10:00 AM (Pacific Time)
HOW TO HAVE A SECURE SUPPLY CHAIN.
Michele will discuss the critical factors in selecting vendors that will avoid disruptions and ensure a secure supply chain
Tuesday, June 9th, 2020 - 10:00 AM (Pacific Time)
PCBA RISK MITIGATION THROUGH SOLDER PASTE AND FLUX BEST PRACTICES
This presentation focuses on solder paste flux, liquid flux and wire solder fluxes and how their usage and the ingredients can affect PCBAs. If no clean fluxes are partially cleaned then the flux ingredients can pose a risk similar to un-washed high activity water soluble fluxes. Rework of solder ...
Wednesday, July 22nd, 2020 - 10:00 AM (Pacific Time)
AUTOMATED CABLE TESTING BEST PRACTICES
The focus of this presentation is on the use of automated cable and harness testing best practices. No prior knowledge of cable testing is needed as we will review the basics of Ohms Law, testing errors (opens, shorts, miswires, etc.) and why automated cable testers are used. We will discuss th...

Friday, July 17th, 2020 - 11:00 AM (Pacific Time)
HIPOT ELECTRICAL SAFETY TRAINING
Program Overview: - Voltage & Current Safety Overview - What Not to do! - Are Hipot Testers Safe? - Setting up a Safe Work Area - High Voltage Safety Standards - Training for Safety Overview: Your boss has just given you a hipot electrical safety tester. You've never used one before and yo...

Thursday, July 9th, 2020 - 10:00 AM (Pacific Time)
BENEFITS OF AUTORANGING DC POWER SUPPLIES IN TEST APPLICATIONS
The Benefits associated with Autoranging DC Power Supplies in Test Applications.

Thursday, June 18th, 2020 - 10:00 AM (Pacific Time)
WHY DO AC SOURCES HAVE VOLTAGE DISTORTION, WHAT CAUSES IT AND WHY DOES IT MATTER?
Voltage distortion is an important performance specification for a programmable AC power source used for design,developement and production test. This webinar explores causes, impact and difference in distortion performance of different AC power source designs.

Tuesday, July 28th, 2020 - 10:00 AM (Pacific Time)
PLANAR TRANSFORMERS AND INDUCTORS FOR EMBEDDED APPLICATIONS
Energy conservation for reasons of cost, battery life, heat, and environmental issues push designs to lower voltage and smaller size --- a key parameter for industrial design as well. Planar technologies provide the increased power density and efficiency required to meet these needs.

Wednesday, July 15th, 2020 - 10:00 AM (Pacific Time)
MICROPEM FASTENERS ARE THE BETTER ALTERNATIVE TO SCREWS
Learn how you can reduce the size and weight, and cost, of your designs with microPEM fasteners.

Tuesday, June 23rd, 2020 - 10:00 AM (Pacific Time)
HIGH RELIABILITY SIGNAL AND POWER CONNECTORS
Overview of Positronic high reliability connectors (Including our industry leading configurable interconnects).